• by airquippipetool
• News
• . 21 Apr 2025

Innovative Techniques For UNIPIPE Pipework Installation: A Guide For Facility Management!

For compressed air and auxiliary pipeline systems, modern pipework installation is suitable. The precisely driven process assures efficiency, durability, ease of integration across industries, and more.

One such modern system that is gaining popularity with a more reliable and flexible solution for Australian environments is the Unipipe aluminium compressed air pipe by EQOfluids. Despite how sophisticated these systems are, the methods of installation are more important to the success of a Unipipe system than the materials themselves. Understanding Unipipe Pipework installation and other strategies is crucial, whether you’re in charge of a big industrial setup or organizing infrastructure improvements for a tiny business. This will help you ease out your process of installation, maintenance, and better-compressed airflow!

With a focus on Unipipe aluminium compressed air pipe systems and a passing mention of auxiliary reticulation systems such as waste oil, nitrogen, and inert gas, this blog examines the essential techniques and procedures used by pipework installation contractors.

What Is Unipipe?

An aluminum compressed air pipe system called Unipipe was created especially for the distribution of compressed air, vacuum, nitrogen, and inert gas. It is mainly corrosion-resistant, lightweight, modular, high temperature resistant, and incredibly effective. It has emerged as the go-to option in sectors where performance and clean air are critical due to its decreased pressure drops and energy loss.

The Unipipe System Offers-

• High resistance to temperature fluctuations
• A more forgiving compression-fitting system (no torque tightening necessary)
• Smooth internal surfaces for reduced friction and pressure loss
• Quick installation and long-term maintenance benefits

Unlike older push-fit systems, Unipipe accommodates real-world variabilities like expansion and contraction, making it perfect for Australian industrial conditions.

Smart Planning And Precision In Pre-Installation

There are a few pre-installation techniques involved that pipe work installation service providers follow. These include-

1. Site Evaluation and Analysis of Air Demand
   Each facility has a different architecture and profile of air use. Mapping the best routing routes while minimizing needless facility layouts, ceiling height, lengths, and pressure dips is performed following a comprehensive inspection. Next, the system pressures and load profiles are examined. Moving on comes the thorough checking of humidity, room temperature, and existing equipment. Then, to future-proof the system, long-term scalability is taken into consideration.
2. Compatibility of Materials
   The choice of material is important even with Unipipe systems. High-performance polymers, stainless steel, and aluminum are all suitable for particular sectors. For example, while aluminium (as in Unipipe) is ideal for most compressed air setups, other systems like nitrogen or high-pressure oil may require stainless steel or composite materials. Selecting the right material based on usage, pressure, and exposure prevents long-term system failures.

Techniques For Installation Used By Service Experts

1. Strategic Looping and Routing
   Based on the possibility, a loop system is used for efficient pipe installation. Experts perform this to avoid bottlenecks and maintain balanced pressure across the network. Also, maintenance may be done without completely stopping the system. Looping and routing are important even in Unipipe pipework installation, as it lowers the chance of a supply failure at endpoints by allowing air to flow in numerous directions.
2.  Optimizing Pipe Dimensions
   It’s important to match pipe size to flow rate needs, where not only the diameter is checked, but the overall sizing matters. Undersized pipes cause performance problems, while oversized pipes might cost more with little additional advantage. You need an accurate measurement for the seamless installation of Unipipe systems.
   Expert pipework installers choose the appropriate size based on their knowledge and software tools for
   >Primary lines
   >Drop lines
   >Points of distribution
3. Dry and Clean Surface
   Internal contamination is one of the most neglected factors in do-it-yourself attempts. To ensure system life and air quality, skilled pipework installation contractors clean all pipes and fittings to prevent the introduction of particles or moisture.
4. Free of Joining Leaks
   Unipipe by EQOfluids uses a compression-style fitting system that offers greater tolerance and flexibility. This design significantly reduces the risk of leaks caused by over-tightening or under-tightening. The installation process involves simple yet secure mechanical compression fittings, which create a seal without requiring precision torque tools.

The Integration Of Auxiliary Pipework Systems

Compressed air is not the only use case for Unipipe systems. Experts frequently broaden their scope of activity in piping installation to:

• Identify high-pressure oil supply lines and waste oil
• Build networks of grease suppliers for automatic lubrication
• Check systems for nitrogen and inert gases in regulated settings and laboratories

It is essential to deal with seasoned pipework installation services with a wide range of experience. As these systems call for extra knowledge in material handling, pressure management, and safety compliance, the experience of professional piping installers can help.

The Final Step- Testing!

Following system assembly, a thorough inspection and commissioning procedure is initiated. This comprises:

• Leak detection and pressure testing
• Balancing of the system
• Verification of flow at multiple endpoints
• Connectivity with end-use nozzles, reels, and pumps

The system is only approved for operational usage following this last phase.

Final Words!

Unipipe by EQOfluids offers the flexibility and resilience modern facilities demand, especially in Australian conditions where temperature sensitivity is a concern. At Airquip and Pipetool, we have specialized in providing expert pipework installation services since 1997. While we are based in South Australia, we serve the majority of our work, almost 80% of our service, in the Greater Adelaide region. With over two decades of experience, we’ve completed projects across compressed air, waste oil, nitrogen, and beyond—bringing precision, safety, and reliability to every job.

Want to explore the right solution for your facility?
Reach out to our team and discover how we can streamline your next pipework project.